How to put Canon Printer in Service Mode (G2000, G2002, G2100, G2200, G2400, G2500, G2700, G2900)
Step to access service mode in Canon printer
- Turn off the printer.
- Press and hold the Stop button.
- Press and hold the Power button.
- Release the Stop button (the Power button is still pressed).
- Press and releasing the Stop button 4 times.
- Press and hold the Stop button.
- Release the Power and Stop buttons together.
After both buttons are released, the power indicator will blink green for some time and then the green will light constantly.
If the power indicator did not have constant green light and the printer continue to display an error, it's mean you made a mistake in entering service mode. Turn off the printer and repeat the process.
Applicable Printer:
G2000, G2002, G2100, G2200, G2400, G2500, G2700, G2900
Also in News
Beginner's Guide to Laptop Repair
Seasoned repair technicians started from very little knowledge and evolved into what they are now. If you are planning to take this path as a part-time or full-time profession, there are few things that you need to keep in mind to get you started on the journey towards becoming a successful laptop repair technician.
Quick guide for fixing "Battery Not Detected" Issue in Acer One 14 Z1402
We would like to share some ideas for resolving issues in Acer One z1402 where battery cannot be detected by the system. The troubleshooting concept here may be applicable to other laptops with similar charging circuit designs.